42326 Tamiya TA07 MS full details

Tamiya has some more info on the TA07MS. I’m even more tempted now :) here is the lowdown.

My prototype TRF07 as no photos available from Tamiya

The TA07 PRO, is a very popular chassis kit among club racers across the world and one of the most popular machines to use for the Tamiya Championship Series

.

This version of the platform has been given a significant overhaul endowing it with even greater potential! It is infused with parts designs and concepts from the top-level TRF419XR chassis to create a beast on the racetrack! 

• 1/10 scale R/C chassis assembly kit. 

• 2.25mm carbon fiber lower deck paired with a 2mm thickness dual bridge-type vertical frame. 

• Aluminum bulkheads. 

• Retains the 3 selectable motor positions from the TA07 PRO, giving total control over drivetrain setup. 

• Features the proven TRF419XR suspension setup, with TRF super short big bore dampers. 

• Drive belts and differentials are mounted approximately 2mm lower than standard TA-07 Pro/R for great traction under acceleration. 

• New 20T center pulley ensures minimal belt tension yet a highly smooth drive. Standard TA-07 comes equipped with 18T center pulley. 

• Final internal drive ratio: 1.85 (TA-07 Pro/R: 2.05) 

• Motor position is 1mm toward the chassis center for optimal balance. 

• Damper stays for use with standard TRF dampers included. 

• Ball-Bearing sway bar mounting system for precise tuning. 

• Requires: 2-Channel radio, steering servo, ESC, motor, 7.2-7.4 battery with charger, tires & 190mm body set. 

Source: Tamiya Inc., Japan.