TRF 417 steering slop fix
I've been checking out my TRF today and managed to get rid of a lot of the slop in the steering. For the steering bridge I kept the 0.1 ...
https://www.thercracer.com/2011/04/trf-417-steering-slop-fix.html
I've been checking out my TRF today and managed to get rid of a lot of the slop in the steering. For the steering bridge I kept the 0.1 and 0.7mm shims but also added a STD tamiya washer on the top and bottom of the screw. This took out loads of the slop and it's still smooth as silk.
![](https://lh3.googleusercontent.com/blogger_img_proxy/AEn0k_vvA40KWLoWyg_cgq_zVWES4vjNlTTrdHvaaOPD7HusXJrXFKn-aakDJdwNq3Eq37S1x3tMreSQHHeGr3FSuvUDE8hdfLtnA6CmbH4MXU83NM-QyesarfEClm_Z=s0-d)
![](https://lh3.googleusercontent.com/blogger_img_proxy/AEn0k_sGO7z2aawvQIxF262ULB_t7lYsktyW50kcg887ebPi4kWa13CcAZadCxQDs9K9Ip9f0w4NYEBbKdWEonkxDYVj29pJVualMEQTmIzaOtzKcrlPtX9ixkp3HYVx=s0-d)
On the steering posts I just added 0.2mm under the carbon brace on each side to stop the lift. The steering is nice and smooth and a lots less sloppy.
![](https://lh3.googleusercontent.com/blogger_img_proxy/AEn0k_vmUaAeEYe9M3LOnkeNwVr4-SxXEF29IIL138wzlgNlsLp_DnZSE4Oc7GTQHZuygsmgmhRPAamfblnRuSt3VaYI_xlwNw5klxJGQykGht0nhS1zFcnmSE7dhdM=s0-d)
On the steering posts I just added 0.2mm under the carbon brace on each side to stop the lift. The steering is nice and smooth and a lots less sloppy.