TEH-R31 Build thread part 3
So following on from part two here Stage 9 Rear pulley This is a nice easy stage, the pulley goes together really easily compared to t...
So following on from part two here Stage 9 Rear pulley This is a nice easy stage, the pulley goes together really easily compared to t...
Well it was less wet than last time, although that would not be too hard :) Here is the excellent report from RCracingTV Here are the ...
Here is the first picture of the Tamiya Vajra. It is an extended carbon chassis version of the Avante! It looks like a bargain bin spec...
following from part 1 here Stage 7 Front and rear bulkheads This is a nice easy stage, you need to really fit the ball joints in ...
Here it is, Other things to note which are not on the sheet are: Cut motormount Cut topdeck Rear geardiff 1000W Front and rear spl...
Ok, so first up I printed the manual which can be downloaded here. Manual Unfortunately, there is no parts list in the manual, which you ...
Looking at the excellent gallery at the RedRC ETS pages here . There are some pictures of Marc's TRF417. You can see there are some upd...
Look what's popped in through the letterbox in time for my birthday. It's a cheap entry level drift chassis.. With 50 degree steerin...
Outgoing Euro Touring Series Champion Marc Rheinard has won the sixth & final round of the 2010/11 series after backing up his win i...
If only I could read Japanese well! - Posted using BlogPress from my iPhone
The Tamiya suspension mounts are a powerful tuning option to help you refine the way in which your car will handle on the track. Th...